Customer Support Engineer ( Thinfilms | Optics) (# 109440) (Beaverton, OR)

Job Title: Customer Support Engineer

Location: Beaverton, OR

Duration: Fulltime

Job Description:

The Customer Support Engineer 3 (CSE) is primarily responsible for customer service activities that are associated with updating, troubleshooting, diagnosing and repairing highly complex capital equipment at customer sites and trade shows. The Customer Service Engineer represents the company to the customer and assumes accountability for customer satisfaction with service. The CSE assures the operational quality of the system equipment and coordinates actions with customers to minimize down time and may provide assistance to Installation Engineers in resolving problems.

Evaluates, analyzes, diagnoses and troubleshoots technical equipment problems via telephone or at customer site.  Ensures equipment enhances customer production. Repairs and modifies equipment at customer facility. Evaluates equipment to determine type and extend of problem. Repairs involve board problems which can be performed using standard procedures as well as system level problems which have multiple causes and no standard procedures exist. Repair of system level problems are based on CSE's technical knowledge, education and training. Board problems vs. system level problems are split 50/50. In analyzing and diagnosing equipment problems, CSE's may access and determine problem exists in customer process such as chemical leaks or contamination and as a result may recommend shutdown of customer fab due to unsafe conditions. Prepares field service reports on customer support activity and provides documentation to other supporting functions supporting functions on re-occurring problems. Prepares quotes for customers based on labor, travel expenses incurred and parts needed. CSE's use discretion and assist regional admin in preparing quotes based on reason for equipment failure, time to prepare etc. Cross trains and assists other field service engineers as appropriate. Provides guidance and technical assistance to Installation Engineer on installations at customer sites or on installing/dismantling demonstration machines.

The nature of work requires that CSE's work independently; only occasionally requiring guidance from management. CSE's are required to contact management on a daily basis (at least twice each day in a down tool sit.) to report activities. CSE's spend part of their time in the office resolving equipment problems via phone and at least 50% of time at customer site. Contribute to the Capturing, Re-use, Collaboration, and Improvement of knowledge using available systems.

Desired Qualifications:

• Ability to understand and troubleshoot problems in software and electronics, optics, mechanical, electro-mechanical and electro-optical systems.

• Analytical skills

• Knowledge of computer theory, various operating systems and applicable operating system software knowledge, Networking in a Windows, Unix or Novell environment.

• Basic automation functionality on assigned equipment set. Develops technical proficiency in

• Preventive Maintenance (PM) aspects of assigned equipment set.

• PM work can be done with instruction of a manager or senior engineer.

• Must successfully complete ongoing technical training to acquire a thorough knowledge of company equipment, the application of diagnostic techniques and practical application of service aids.

• Microsoft Office proficiency is required.

• Attainment of Certification Level 2 or PM Training. Basic proficiency in systems level repair of a product within a family is required.

• Semiconductor industry process knowledge, required to take the KT class for Introduction to semiconductor processes.

• Good interpersonal/communication skills in understanding customer needs. Ability to work under pressure and stringent timelines since the system is down for service and  may effect customer manufacturing area.

• Ability to troubleshoot problems in software and electronic systems.

• BSEE/BSET or equivalent work experience in supporting complex capital equipment for the semiconductor industry. Typically 2-4 years within the semiconductor industry. Clean room environment experience a plus

Minimum Qualifications:

Bachelor's Level Degree with at least 3 years of experience.

OR

Master's Level Degree with at least 2 years of experience.

Kindly send in your resumes to raju.balaji@kla-tencor.com

Senior Mechanical Design Engineer ( electron optics systems | high/ultra high vacuum systems) (# 109589)

Job Title: Senior mechanical design Engineer

Location: Milpitas, CA

Duration: Fulltime

Responsibilities:

1. Develop and document designs for electron optics systems/subsystems from concept to completion and final release to manufacturing.

2. Produce mechanical system/subsystem specifications in order to meet  performance requirements.

3. Design, modify parts or large scale assemblies using ProEngineer.

4. Create detailed drawings using ProEngineer to be used for the manufacture of assemblies and components.

5. Participate/lead design reviews, error budget development, risk assessment and mitigation.

6. Perform structural and thermal FEA using ProMechanica.

7. Evaluate vendor components, develop specifications, analyze/select materials and verify design accuracy.

8. Define test plans, perform testing and write test reports.

9. Document testing, manufacturing and assembly procedures.

10. Work with outside vendors and consultants to develop, analyze and fabricate components and subassemblies.

11. Provide effective presentation and written evaluations to communicate concepts, designs, test results, etc.

Preferred Qualifications:

1. Direct experience designing systems/subsystems used for electron optics such as deflectors, objective lenses, vacuum chambers, gate valves, in vacuum positioning, etc.

2. Familiarity with mechanical designs used for electron optics systems, wafer transport and high/ultra high vacuum systems is a must.

3. Ability to develop/conceptualize mechanical system/subsystems based on a set of requirements.

4. Familiarity with materials, manufacturing and cleaning processes used for making components for electron optics systems.

5. Should be able to perform basic structural and thermal FEA using either ProMechanica or SolidWorks Simulation.  The ability to perform complex analysis a plus.

6. Must have experience designing parts and assemblies for use in high and ultra high vacuum and in high voltage environment.

7. Must be able to create 3D part/assembly models and detail drawings for fabrication per best practices using ProE.  Should be able to perform tolerance 8. analysis on designs to ensure budgets are met. Should have a thorough understanding of GD&T standards.

Working knowledge of vibration.

9. Must be able to work with team members and with outside contractors, consultants, and machine shops.

Minimum Qualifications:

Bachelor's Level Degree with at least 12 years of experience.

OR

Master's Level Degree with at least 8 years of experience.

OR

Doctorate (Academic) with at least 5 years of experience.

Please send your resumes to vinod.sanker@kla-tencor.com

Product development Engineer (Multiple Openings) ( Physics | optics | metrology | opto-mechanical | Optical Critical Dimension) (#109913)

Job Title: Product development Engineer

Location: Milpitas, CA

Duration: Fulltime

Job Description:

Responsibilities:

The Product Development Engineer plays a central role throughout the different phases of the product life cycle.  This position is part of a team responsible for developing and supporting next generation Optical Critical Dimension  (OCD) metrology systems as well as supporting and improving current systems. The candidate will play a key role in next generation product development, from technology evaluation and selection, specifications development, product validation, verification, transfer to manufacturing, and support of customer ramp. The candidate will maintain ownership of the product through the life cycle and be responsibility for improvement projects and support of field and manufacturing issues. The ideal candidate will demonstrate leadership attributes and be able to lead high performing teams to achieve program objectives in a timely manner.

The engineer must be able to complete the initial diagnosis of any system issue, uncover root cause and devise or drive a team to define solutions for complex problems. Must be able to support the detailed analysis and tradeoffs for the various solutions, develop plan of action, and effectively communicate plan to colleagues to execute. Must have the knowledge and experience to effectively work with experts in optics, electronics, mechanics, software, and algorithms as required to resolve issues. Some travel may be required to support product transition to manufacturing, beta support at customer sites, and for complex cases that require on-site support.

Additional details regarding responsibilities:

Develop concepts and designs for the next generation system. Investigate next generation opto-mechanical technology and analysis.

Resolve inconsistencies between subsystems, conduct trade-off studies, identify high-risk areas, and develop risk mitigation strategies.

Ownership of creation and execution of prototype test plans for complex subsystems. This will involve integration of subsystems, testing against design tolerances and marketing specifications, analyzing test data, and generation of reports.

Drive product or feature introduction. This includes preparation of first draft of system alignment, calibration and troubleshooting diagnostics for existing and new products, training of operations and field personnel, and solving technical issues that may impact production introduction.

Train operations and service and manufacturing employees.

Drive team to resolve system issues at customer site or in manufacturing. Work with engineers at locations around the globe to solve issues escalated to engineering: establish root cause, develop plan of action (POA), guide local teams in execution of POA, and document issues and solutions to improve design and/or procedures so that they may be implemented across the fleet in a standard manner.

Will require some travel (< 25%).

Preferred Qualifications:

1. PhD in Optics, Physics, Electrical Engineering, Systems Engineering, or related technical field.

2. Strong background in engineering or the physical sciences with demonstrated analysis and problem solving skills.

3. Hands-on experience constructing and aligning opto-mechanical system is highly desirable.

4. Experience diagnosing and driving solutions to complex problems across whole systems by applying appropriate problem solving techniques.

5. Ability to communicate effectively to all levels of the division, customers, vendors and across cultures.

6. Experience in the semiconductor capital equipment or manufacturing industry.

7. Familiarity with Matlab and JMP.

8. Project management skills (scoping, budgeting, and scheduling).       

Minimum Qualifications:

Bachelor's Level Degree with at least 5 years of experience.

OR

Master's Level Degree with at least 3 years of experience.

OR

Doctorate

Kindly send in your resumes to vinod.sanker@kla-tencor.com

Product development Engineer ( Physics | Photonics | DUV | UV laser | characterization) (#110053)

Job Title: Product development Engineer

Location: Milpitas, CA

Duration: Fulltime

Job Description:

Responsibilities:

The Laser Engineer will contribute to the development of high-reliability, high-power, deep-UV laser technology for KLA-Tencor’s inspection tools. He/she will prototype laser and nonlinear optics assemblies, thoroughly characterize those prototypes in the lab and use the results provide suggestions to improve the design.

Important tasks include:

1. Set-up and detailed characterization of prototype wavelength converters.

2. Evaluation and qualification of lasers and optical components.

3. Data analysis and statistical analysis

4. Documentation of alignment and test procedures for transfer the manufacturing

5. Careful experimentation is required to ensure that the results are accurate. This Engineer must be able to work without close supervision, complete the assigned tasks, and write up the results.

He/she will interact with the world-class team of optical, mechanical, electrical and software engineers who develop KLA-Tencor’s market leading inspection systems. He/she will work with KLA-Tencor’s manufacturing organization and outside vendors to transfer the technology into production.

Preferred Qualifications:

1. Hands on experience in carrying out experiments to thoroughly and accurately characterize high-power lasers and UV wavelength conversion stages.

2. Candidates for this position must have a strong background in the design, set-up and experimental characterization of high-power UV laser, and nonlinear optical wavelength converters.

3. Strong optical alignment, diagnostic, and documentation skills are required. Comprehensive experience with optical diagnostics and test equipment for characterizing the spatial, spectral, and temporal characteristics of laser systems (power meters, optical spectrum analyzers, imaging equipment, spatial beam quality test equipment, etc.).

4. Must be a team player with good written and verbal communication skills.

5. Ph.D. in Physics, Photonics, or equivalent field with a minimum of 2 years of relevant work experience.

6. Deep-UV experience is highly desirable. Experience with mode-locked and/or cw  DPSS lasers is desirable.

7. Vendor management experience is a plus. Matlab and LabView skills are a plus.

Minimum Qualifications:

Doctorate (Academic) in Physics, Photonics, or related field and at least 2 years of relevant experience.

OR

Master's Level Degree in Physics, Photonics, or related fields with at least 4 years of relevant experience

Please send in your resumes to vinod.sanker@kla-tencor.com

Product Marketing Manager (Multiple Openings)( Semiconductor Capital Equipment | optical CD metrology equipment) (#109904)

Job Title: Product Marketing Manager

Location: Milpitas, CA

Duration: Fulltime

Job Description:

Responsibilities:
This is a field marketing role in KLA-Tencor's film and scatterometry division, one of the core groups of KLA-Tencor's metrology business. The film and scatterometry division, conceives, develops, manufactures and markets film and optical CD metrology equipment for the front end semiconductor manufacturing process counting all major semiconductor manufacturers among its key customers.

The successful candidate will be responsible for managing key accounts within a specific region including developing strong customer relationships, driving technical alignment meetings, working with an international sales team to define penetration strategies, formulate competitive responses and manage tool evaluations and competitive run-offs. Candidate must be strong technically to be able to deliver detailed presentations to the customer. Strong leadership across differing functional groups and effective communication with executive management will also be key elements to success in this role.

The successful candidate will have a strong understanding of the semiconductor manufacturing process and the importance of metrology tools and techniques in improving process control and will likely have worked in a wafer Fab environment.

Preferred Qualifications:
1. Minimum of a Bachelors Degree in a technical discipline.
2. 5-10 years experience in a high tech industry, preferably in semiconductor industry.
3. Direct product marketing experience in a semiconductor or related industry is required.
4. MBA is considered an advantage but not essential to the position.

Minimum Qualifications:

Master's Level Degree with at least 4 years of experience.

OR

Bachelor's Level Degree with at least 5 years of experience.

Please send in your resumes to vinod.sanker@kla-tencor.com

Manager, Product marketing (Multiple Openings) (NPI | Sales Marketing| Product Life cycle | Semiconductor capital Equipment)(# 110029)

Job Title: Manager Product Marketing

Location: Milpitas, CA

Duration: Fulltime

Job description:

Business Unit:

KLA-Tencor Corporation (NASDAQ: KLAC), a leading provider of process control and yield management solutions, partners with customers around the world to develop state-of-the-art inspection and metrology technologies. These technologies serve the semiconductor, data storage, compound semiconductor, photovoltaic, and other related nanoelectronics industries. With a portfolio of industry-standard products and a team of world-class engineers and scientists, the company has created superior solutions for its customers for over 35 years. Headquartered in Milpitas, California, KLA-Tencor has dedicated customer operations and service centers around the world. Additional information may be found at www.kla-tencor.com.

Responsibilities:

Directs the development of company market requirements for specific product(s) or product line(s), including product strategy definition, requirements analysis, and pricing. Monitors the development of business plans, managing lifecycles, and product positioning in the marketplace. Reduces broad concepts and business strategies into structured product marketing plans. Oversees market research, monitors competitive activity, and identifies customer needs. Establishes pricing strategies. Interacts with engineering, manufacturing and sales to enhance existing product(s) or product line(s). Leads new product definition and business plans with joint departments. Selects, develops, and evaluates personnel to ensure the efficient operation of the function. Employees matched to this job family should have responsibility for managing people in addition to product responsibility.

Preferred Qualifications:

1.Semiconductor Experience

2.Product Marketing Experience

3.Cross-functional Management

Minimum Qualifications:

Master's Level Degree with at least 4 years of experience.

OR

Bachelor's Level Degree with at least 6 years of experience.

Please send in your resumes to vinod.sanker@kla-tencor.com

Senior Compensation Program Manager (Compensation | Program Management | CCP / CBP) (# 109914)

Position: Senior Compensation Program Manager

Location: Milpitas, CA

Duration: Full time

Job Description:

Human Resources partners with management to attract, develop, engage and retain highly qualified people globally to meet the business needs.

Reporting to the Director of Global Compensation, the Senior Compensation Program Manager will proactively collaborate with the HR Business Partners (HRBPs) and Management to provide knowledgeable and experienced consultative, analytical and project management services in support of KLA-Tencor’s Total Rewards philosophy. The successful candidate will drive and execute compensation programs and activities while ensuring internal equity, external competitiveness, and compliance with all applicable laws, regulations and organizational policies.

Responsibilities:

• Ensures our total compensation programs and practices remain competitive and are strategically aligned to the business

• Works globally with Compensation and Benefits to monitor, benchmark, develop and execute the company’s compensation programs against relevant industry, market data and key competitive firms

• Evaluates programs and information on legislation, trends, advances and/or new technologies through research and detailed analyses; makes recommendations for changes and improvements as necessary

• Operates as primary advisor and technical expert on compensation-related matters, including compensation philosophy, policies, programs and approaches, identifying client needs, managing the relationship, brokering development of and delivering solutions to the business

• Partners with the global HRBPs to market and communicate compensation philosophy, programs, policies, and guidelines. May create training materials and/or train the HRBPs in support of existing and new programs.

• Researches best practices and trends, and determines effectiveness and competitiveness of existing compensation programs; if warranted, presents alternative cost-effective solutions that are consistent with the company’s strategic objectives

• Provides recommendations and solutions to effectively address business issues

• Supports the Director of Global Compensation and Senior Director of Total Rewards and HR Operations in the administration of executive compensation programs to include total compensation benchmarking and Compensation Committee preparation

• Undertakes and performs special projects and assignments as needed

Preferred Qualifications:

• Exceptional analytical thinking skills, with demonstrated experience influencing management; proven track record of building consensus and business partnerships

• Demonstrated ability to present, influence, negotiate and effectively coach HRBPs and management on global C&B programs

• Lead and build consensus with stakeholders

• Demonstrated project/program management skills

• Excellent organization, presentation, and interpersonal skills

•  Ability to deal effectively with ambiguity, recognize trends and identify systemic approaches to solving problems

• Must be detail oriented, with ability to set priorities and multi-task

• Maintain current knowledge of HR trends and best practices

• Sound knowledge of Microsoft Word and PowerPoint; expert knowledge of Excel

• Prior experience with HRIS systems and report creation; PeopleSoft and/or MarketPay a plus

Basic Qualification:

Bachelor’s Degree in Human Resources or related field preferred; advanced degree a plus

Minimum 8 years’ progressive experience in compensation

Certified Compensation Professional and/or Certified Benefits Professional (CBP) designation highly desirable

Experience working for multi-national businesses

Kindly send your resume to raju.balaji@kla-tencor.com  

Software Engineering Manager (C++/ C# / OOD / OOP / Java / UML / EDA ) (#110037)

Position: Software Engineering Manager
Location: Milpitas, CA
Duration: Full time

Job Description:
The Wafer Inspection Division (WIN) is the world leader in the design and manufacture of advanced optical inspection tools for inline monitoring of process defects in advanced semiconductor factories.

We are seeking a Software Project Manager in our Milpitas, California campus.

Responsibilities:
You will be a key member of our highly integrated multi-disciplinary engineering team comprised of software, optical, mechanical, robotics, electronics, control systems and image processing engineers. You will be responsible for managing software projects for next generation Semiconductor Wafer Inspection machines. You will coordinate software planning, development, testing, and quality control with engineers across a large global software team. You will work closely with a variety of software teams to track and report progress to the team and senior management.  You will leverage your strong people skills to help manage resource dependencies across features and projects and work with managers and engineers on the R&D, Applications, Manufacturing, and Service teams to clear roadblocks and keep development running smoothly. You will leverage your strong engineering background to help guide technical decision making on the project. You will leverage your ability to influence others to help you get things done, even if they don't report to you.  You will collaborate closely with customers, internal and external, to define use-cases and requirements and act with a sense of urgency to deliver value quickly.

Preferred Qualifications:
Qualified candidates will meet the following criteria:
•You have 7 years of experience developing Object-Oriented software in Java, C++, or C#.

•You have experience writing software to control hardware including instrumentation, servo systems, data acquisition, or robotics.

•You have at least 3 years of experience managing software projects with 15 or more software developers contributing to the code base.

•You are an excellent communicator-- you write and speak clearly.

•You really like working with people.  You have excellent soft skills.

•You are a wizard with MS Project, Excel, and leading ALM tools (IBM RTC, MS TFS, or other)

•You know how to deliver quality products. You have experience defining testing strategies and leveraging automation to minimize testing cycle time.

Preference given to candidates that meet some of the following criteria:

•You are a certified Scrum Master. You have experience scaling Agile practices in large organizations. 

•You have PMP certification.

•You have experience working with EDA tools and GDSII/OASIS data formats.

•You have experience writing image processing software.

•You have worked with large scale storage technologies.

•You have worked in the semiconductor equipment industry.

Minimum Qualifications:

Bachelor's Level Degree with at least 10 years of experience.

OR

Master's Level Degree with at least 9 years of experience.

OR

Doctorate (Academic) with at least 7 years of experience.

Kindly send your resumes to Sivaram.bose@kla-tencor.com

 

Applications Development Engineer ( # 109970)

Position: Applications Development Engineer

Location: Milpitas, CA

Duration: Full time

Job Description:

The Global Service Support Organization (GSS) team headquartered in Milpitas, CA is our service organization that consists of Service Sales and Marketing, Spares Supply Chain management, Field Operations, Product Training, and Technical Support. The GSS organization partners with our field teams and customers in all business sectors to maintain the high performance and productivity of our products through a flexible portfolio of services. Our comprehensive services include: proactive management of tools to identify and improve performance; expertise in optics, image processing and motion control with worldwide service engineers, 24/7 technical support teams and knowledge management systems; and an extensive parts network to ensure worldwide availability of parts.

Responsibilities:

1) KT Certified division is responsible for sales/marketing of fully refurbished pre-owned systems, mature tools upgrades, buybacks, re-marketing and flexible trade-in programs for surplus tools. Marketing organization is responsible for strategic planning process in KTC, market analysis, tracking KTC MS% & SAM, coordination of customer demos, STRs, RFQ and spec responses, maintenance of sales collateral for internal and external websites, benchmarking and technical engagements to drive customer adoption and strategic penetrations. Additionally Marketing owns product portfolio configuration management and PLC for the ongoing additions to KTC offerings from M&As and EOM.

2) Own all BF applications contracts/acceptances and technical engagements at the customer sites. Support BF applications execution in the demo process (understanding DRF, taking to account team RPM, apps to define demo success criteria), delivering final reports to the customer. Technical function and maintenance of knowledge database for BF, apps review of specs and STRs. Define and arrange for chargeable STRs – KTC apps contracts. Support developing tools and sales collateral enabling field and internal sales to sell KTC's Inspection (BF) range of product offerings.

3) Team player. Forthright. Respects deadlines.

4) 75% success hit rate for demos and 90% for technical engagements (resulting in bookings). Target/demonstrate incremental increase in bookings after 4 working quarters (minimum of $4M).

5)  Working with diverse KTC organization and global field organization. Leading BF demo team to success resulting in bookings.

6) Opportunities to grow into a demo manager or/and Marketing professional. Willing to get cross-trained on various inspection platforms.

7) Responsible for KT Certified TM delivery of apps related to the sold BF tools (23xx, 28xx), coordination/planning/communication and applications execution, technical function and maintenance of knowledge database, apps review of specs and STRs. Assist in developing tools and sales collateral enabling field & internal sales to sell KTC’s broad range of product offerings. Work closely with diverse KTC organization including operations and internal sales; account teams field sales, Tech directors, RPMs, and apps. This role reports to the Director of Marketing in KT Certified TM division responsible for fully refurbished pre-owned systems, mature tools upgrades, buybacks, re-marketing and flexible trade-in programs for surplus tools.

8) Ability to travel worldwide (on average 50%) is required to support customer visits and possible execution of demos and/or technical engagements in the field.

Preferred Qualifications:

• Candidate must have min of BS/MS in Engineering, Physics, Material Science or related fields. MBA is a plus. Required knowledge of operation/applications of KLA-Tencor B and DF tools, preferably certified to run 28xx, 23xx, 21xx, PUMA, AIT XP and higher.

• Required knowledge of operation/applications of KLA-Tencor’s BF and DF tools, preferably certified to run 28xx, 23xx, PUMA, AIT XP and higher. Ideal candidate will have demo lab experience on these systems. Must have 5+ years of experience in IC processing/semiconductor industry or related field.

• Hands on KT tools knowledge.

• Excellent communication/presentation, organizational, analytical, leadership, and interpersonal skills. Candidate must be self-driven, independent, yet a strong team player

Basic Qualifications:

Candidate must have min of BS/MS in Engineering, Physics, Material Science or related fields

Certified to run 28xx, 23xx, Hands on KT tools knowledge.

Kindly send your resume to raju.balaji@kla-tencor.com

Service Systems Engineer ( Optics | Metrology | Troubleshooting ) (# 109825)

Position: Service Systems Engineer

Location: Milpitas, CA

Duration: Full time

Job Description:

As a service systems engineer, you will be actively engaged in improving KLA-Tencor's advanced semiconductor optical metrology products, and the service teams which support them. You will be based in Silicon Valley and work in a globe-spanning team.

1) Gain a systems-engineering level knowledge of highly complex, leading edge systems by working with the product development team. The systems include optics, electronics, mechanical components, and custom software and algorithms.

2) Assess systems with respect to design for reliability, stability, and serviceability

3) Participate in the development and testing of diagnostics and spec tolerances

4) Act as a two-way conduit for information transfer between the engineers who are responsible for designing our products and field service teams who are responsible for product maintenance and support

5) Gather and analyze data from systems populations at customer sites to identify sources of systematic issues, including technical, process, and people-based issues

6) Help develop and document technical service procedures

7) Train support personnel such as tech support and field service engineers

8) Assist in developing training materials

9) Respond to situations where field service engineers have failed to resolve complex system performance problems, by providing written plans of action by e-mail or hands-on assistance at customer sites in the US, Asia, and Europe

10) Write technical reports to communicate issues, analysis, technical assessments, system status, and engineering recommendations

11) Take a proactive approach to improving service quality and profitability

The person who will thrive in this kind of  job is interested in technology, human factors, and business, is motivated by helping others succeed and by driving improvements, and enjoys communicating, building working relationships, and influencing people.

Preferred Qualifications:

Results oriented and driven to excel.  Enjoys teaching, troubleshooting, working with groups of people, and explaining complex things as simply as possible. Strong analytic and data analysis skills.  Experience with analytical software such as Matlab or JMP is desirable. Excellent oral and written communication skills. Ability to work effectively in multidisciplinary, multicultural teams and to take a leadership role when needed. Quick grasp of challenging, complex technical information.  Natural curiosity, inventiveness, and an interest in making things work better. Multi-lingual proficiency in English plus Japanese, Korean, Mandarin, German, or French is desirable.

Basic Qualifications:

Qualifications:  Recent Ph.D. graduate in Physics, Optics, Electrical Engineering, or related technical field or equivalent experience. Hands-on experience designing, building, and/or troubleshooting complex instruments, such as experimental research instruments.  Knowledge of optics, electronics, software, and/or mechanical systems. Availability for travel both domestically and internationally (<25% time).  Ability to work non-standard working hours if needed.

Kindly send your resume to raju.balaji@kla-tencor.com

Financial Analyst (# 109989)

Position: Financial Analyst

Location: Milpitas, CA

Duration: Full time

Job Description:

KLA-Tencor has manufacturing sites across the globe, including Belgium, China, Germany, Israel, Singapore and Milpitas (CA).  The Global Operations (GOPS) team, comprised of Manufacturing, Supply Chain Management, Manufacturing Engineering, Installation, and Quality, is responsible for manufacturing our leading-edge technology.  We partner with our world-wide supply base and our design engineering teams to bring new products to market.  The GOPS team is continuously working to build our products Better, Faster, Cheaper.

Responsibilities:

The Role:  Financial Analyst

We are looking for a sharp finance professional to join our Global Operations Financial Planning and Analysis team who will be responsible for forecasting, strategic operations planning, analytics, and management reporting.  The ideal candidate would have an interest in manufacturing operations and the metrics that help to drive improvements.  You will be a key contributor to driving Operations headcount planning, Gross Margin improvement, Inventory management and Materials Cost reduction. You will interact with executives and have high visibility throughout the company.  Successful candidate will be a top performer who has a passion to champion positive change throughout the organization.

Essential Functions:

1) Provide financial and analytical support for the company's forecasts and results

2) Create and implement process improvement across the company in all regions

3) Create new reports and models to meet the business' needs and drive decisions

4) Perform ad hoc financial analyses and special projects

5) Perform ad hoc financial analyses in support of US Operations

6) Prepare quarter end executive reports

7) Support improvements of our financial planning models and system

8) Participate in all budgeting and forecasting processes

9) Monitor and report operating results against budget and forecast

10) Create and distribute scalable weekly, monthly and quarterly management reports

Skill Requirements:

- Team player with a positive attitude

- Strong Analytical skills

- Strong computer skills and extensive knowledge of Excel

- Fast learner with new tools and systems

- Ability to think strategically and proactively

- Organized, detail-oriented, and able to multi-task

- Strong ability to partner and build relationships

- Ability to meet deadlines and prioritize; to troubleshoot and problem solve

- Must be comfortable presenting data to senior management

Preferred Qualifications:

MBA preferred

Experience with Cognos TM1 preferred but not required

Basic Qualifications:

Bachelor's Level Degree with at least 3 years of experience.

OR

Master's Level Degree with at least 2 years of experience.

OR

Proficiency with Microsoft Excel and PowerPoint.

Kindly send your resume to raju.balaji@kla-tencor.com

Applications Development Engineer ( Lithography | E-Beam | Troubleshooting ) (# 109757)

Position: Applications Development Engineer

Location: Milpitas, CA

Duration: Full time

Job Description:

Position is in the Reflective Electron Beam Lithography (REBL) group under the CTO's office.  REBL is an R&D group tasked with developing a next-generation electron beam lithography system for high volume manufacturing at the 16nm HP device node.

Responsibilities:

As a member of the REBL Applications Engineering team, hire's responsibilities will include:

• Designing lithography experiments for the REBL system, operating the system, troubleshooting issues, analyzing results, and preparing and presenting reports

• Developing and documenting procedures for system operation, wafer resist development, and other processes used in REBL system operation.

• Supporting marketing, systems, software, and optics team by providing technical results and running experiments

• Testing REBL software releases and evaluating fitness for release to customers

• Remote and on-site support of our customers and partners using REBL technology:  respond to customer requests and perform complex problem diagnosis and problem resolution.

• Do training for customers and less-experienced members of REBL

Preferred Qualifications:

• Semiconductor industry applications or systems engineering experience, especially related to electron beam systems and/or lithography systems

• Detailed knowledge of lithography techniques, semiconductor manufacturing processes, and semiconductor devices

• Strong systems troubleshooting skills

• Experience designing, running, analyzing, and reporting experiments

• Customer-facing experience with strong presentation and written communications skills

• Experience managing projects at customer sites

• Ability to travel 20-30%

Basic Qualifications:

Bachelor's Level Degree with at least 3 years of experience.

OR

Master's Level Degree with at least 2 years of experience.

OR

Doctorate (Academic)

Kindly send your resume to raju.balaji@kla-tencor.com

Staff mechanical design Engineer ( opto-mechanical design | precision mechanism design) (#109652)

Job Title: Staff mechanical design Engineer

Location: Milpitas, CA

Duration: Fulltime

Job Description:

Responsibilities:

The senior level mechanical engineer position is responsible for development of the next generation metrology tool as well as continuing improvement (CIP) of the current tools. The candidate will be responsible for key mechanical engineering tasks, from requirement specification, top level mechanical analysis, conceptual and detail design, prototype integration, testing and handoff to manufacturing. The detail design activities include system-level layout, opto-mechanical design, precision mechanism design and alignment tooling design, using Pro/E as the design tool.

The candidate must participate in the design process in cross-discipline teams including System Engineers, Optics Engineers, Manufacturing Engineering and other groups within K-T worldwide organization. He/she needs to exercises independent judgment in developing methods, techniques and Perform analysis as needed to verify new designs. The candidate is also expected to champion his/her designs throughout the release process and generate all required engineering documentation until they are fully released to manufacturing.

Preferred Qualifications:

Require BSME or MSME (preferred) with at least 8+ years of concentration in mechanical design and engineering.

Must have experience in opto-mechanical design, and/or precision mechanism design.

Must have good understand in physics and mechanics. The candidate must be able to generate system-level concept with all-around consideration and perform high-level mechanical design, testing and troubleshooting.

Familiar with mechanical manufacturing processes including machining, sheetmetal fabrication, welding and castings.

Good communication and team working skills are required.

Experience in structure/vibration analysis, thermal analysis is desirable.

Must be proficient in 3D solid modeling CAD. Strongly prefer ProEngineer/Wildfire 

Minimum Qualifications:

Bachelor's Level Degree with at least 8 years of experience.

OR

Master's Level Degree with at least 6 years of experience.

OR

10 plus years of related experience.

Please send in your resumes to vinod.sanker@kla-tencor.com

Principal System Design Engineer ( CMOS/CCD sensors and camera system design) (# 109697)

Job Title: Principal System Design Engineer

Location: Milpitas, CA

Duration: Fulltime

Job Description:

Responsibilities:

KLA-Tencor seeks an expert level technologist/engineer to lead the development of a high bandwidth, low noise camera system. The candidate will be part of a team of scientists and engineers developing market leading, next generation wafer inspection and metrology systems.

The candidate will be responsible for generating solid-state sensor and camera requirements, defining sensor and camera architecture including device design and interfaces, driving the cooperation of manufacturing partners, integrating the camera system, and verifying sensor and camera performance and reliability.

The successful candidate will have an extensive camera hardware design experience with a demonstrated record of innovation and implementation of leading-generation CMOS/CCD sensors and camera systems, from requirements through design, production and release.  The candidate will also have the abilities to quantify and articulate the merits of sensor and camera technology and roadmaps, and thrive as a part of a team.

Preferred Qualifications:

5+ years of a leading role in high-speed camera design. Hands-on experience with high speed low noise mixed signal hardware design, signal integrity simulations.

Understanding of camera architecture, imaging pipeline, FPGA/DSP programming.

Practical knowledge of solid-state sensor physics.

Experience and knowledge of state-of-the-art CMOS/CCD sensor manufacturing, packaging, and testing processes

Minimum Qualifications:

Doctorate (Academic) with at least 7 years of experience.

OR

Master's Level Degree with at least 8 years of experience.

OR

Bachelor's Level Degree with at least 10 years of experience.

Please send in your resumes to vinod.sanker@kla-tencor.com